Home > Products

All Products

  • Molded PTFE Teflon sheet is manufactured by molding process with PTFE granular resin and sintering. It has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Molded Teflon sheet has the lowest coefficient of friction of all known solid materials. Molded Teflon Blocks has the best electrical properties of all plastic.It is very suitable for seals,linings, diaphragm,scraper guide and bearing pad for bridge.

    Quick view Send Inquiry More

  • Etched PTFE Teflon sheet can be done to any shape or size, most preferred or most commonly used is one side etching Sheet.Etched surfaces will discolor to a grown appearance. It is also called PTFE Etching Sheet. It is an amazing non-stick material, but what about when you need to glue it to the surface of another material ? In order to bond standard PTFE to another surface such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments. When bonding is needed, sodium ammonia etching is usually the most economical answer. This process uses of a mixture of sodium and ammonia that is formulated to create a bondable surface both quickly and efficiently. From microchips to full size rolls, fluoropolymers of any shape or complexity, including tape, sheet, tubing, molded shapes & machined parts of any configuration can be etched & bonded. This treatment can be accomplished on one or more surfaces, or selectively within close tolerances.

    Quick view Send Inquiry More

  • Filled teflon PTFE sheet is manufactured by technics of molding with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE sheet has similar friction levels to ice. Filled PTFE Teflon sheet can work at -180°C ～+260°C and is the best electrical insulator of all known plastics.Filled PTFE sheet has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder, ceramic fiber,metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient

    Quick view Send Inquiry More

  • Filled teflon PTFE sheet is manufactured by technics of molding with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE sheet has similar friction levels to ice. Filled PTFE Teflon sheet can work at -180°C ～+260°C and is the best electrical insulator of all known plastics.Filled PTFE sheet has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder, ceramic fiber,metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient

    Quick view Send Inquiry More

  • Expanded PTFE Teflon sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.PTFE Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. Some of its features are that it has Good Flexibility, Good Seal ability, highly compressible, Non Contaminating, and Non Toxic etc.

    Quick view Send Inquiry More

  • Expanded PTFE Teflon sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.PTFE Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. Some of its features are that it has Good Flexibility, Good Seal ability, highly compressible, Non Contaminating, and Non Toxic etc.

    Quick view Send Inquiry More

  • Molded PTFE Teflon sheet is manufactured by molding process with PTFE granular resin and sintering. It has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Molded Teflon sheet has the lowest coefficient of friction of all known solid materials. Molded Teflon Blocks has the best electrical properties of all plastic.It is very suitable for seals,linings, diaphragm,scraper guide and bearing pad for bridge.

    Quick view Send Inquiry More

  • Etched PTFE Teflon sheet can be done to any shape or size, most preferred or most commonly used is one side etching Sheet.Etched surfaces will discolor to a grown appearance. It is also called PTFE Etching Sheet. It is an amazing non-stick material, but what about when you need to glue it to the surface of another material ? In order to bond standard PTFE to another surface such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments. When bonding is needed, sodium ammonia etching is usually the most economical answer. This process uses of a mixture of sodium and ammonia that is formulated to create a bondable surface both quickly and efficiently. From microchips to full size rolls, fluoropolymers of any shape or complexity, including tape, sheet, tubing, molded shapes & machined parts of any configuration can be etched & bonded. This treatment can be accomplished on one or more surfaces, or selectively within close tolerances.

    Quick view Send Inquiry More

  • Etched PTFE Teflon sheet can be done to any shape or size, most preferred or most commonly used is one side etching Sheet.Etched surfaces will discolor to a grown appearance. It is also called PTFE Etching Sheet. It is an amazing non-stick material, but what about when you need to glue it to the surface of another material ? In order to bond standard PTFE to another surface such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments. When bonding is needed, sodium ammonia etching is usually the most economical answer. This process uses of a mixture of sodium and ammonia that is formulated to create a bondable surface both quickly and efficiently. From microchips to full size rolls, fluoropolymers of any shape or complexity, including tape, sheet, tubing, molded shapes & machined parts of any configuration can be etched & bonded. This treatment can be accomplished on one or more surfaces, or selectively within close tolerances.

    Quick view Send Inquiry More

  • Etched PTFE Teflon sheet can be done to any shape or size, most preferred or most commonly used is one side etching Sheet.Etched surfaces will discolor to a grown appearance.

    Quick view Send Inquiry More
Pre  4  5  6  7  8  9  10  Next