High Chemical Resistant Natural Filled Teflon Rod With Long Durability
Model:kaxite-r009
Quick Overview:
Filled PTFE Teflon rod is manufactured by technics of molding method in the diameter from 5mmto
500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of filled
teflon PTFE rod has similar friction levels to ice. Extrusion teflon PTFE rod can work at -180°C ～+260°C
and is the best electrical insulator of all known plastics.
Filled PTFE Teflon rod has strong corrosion resistance and friction-resistance,By adding filler such as
glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber,
metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products
is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.
metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products
is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.
Glass Fiber:
Increases compressive strength, rigidity and wear. Reduces creep and cold flow Minimal effect on chemical and electrical properties
Carbon:
Increases compressive strength, hardness, wear, and load properties. Good chemical resistance Various types and amounts of carbon can be added to alter conductivity
Graphite:
Reduces coefficient of friction Reduces initial wear Increases strength
Molybdenum Disulfide:
Increases hardness, stiffness, and wear Minimal effect on chemical and electrical properties
Bronze:
Increases hardness and wear resistance Increases dimensional stability and compressive strength Not suitable for corrosive or electrical applications
Applications:
all kinds of chemical,
electrical Insulation
mechanical components
seal,Antisticking materials.
Note:All ptfe rods can be etched for bonding, and can be mounted on a plywood disk for less waste in
machining. Also can be made with filled (reinforced) PTFE to enhance the performance parameters of
PTFE. Materials available for reinforcement are Glass Fiber, Graphite, Bronze we can do.
Specifications:
Property
Unit
Result
Apparent Density
g/cm3
2.10-2.30
Tensile Strength ≥
MPa
≥14
Crack Elongation ≥
%
≥150
Working Temperature
°C
-180°C ~ + 260°C
Diameter(mm)
Length(mm)
Norminal
Tolerance
Norminal
Tolerance
4,5,6
+0.480
100
+5.0
7,8,9
+0.580
100
+5.0
10,13,15,16,18
+1.100
100,1000
+3.60
20,25,30
+1.130
100,1000,3000
+3.60
35,40,45,50
+1.600
100,1000,3000
+3.60
55,60,65,70,75,80,85,90,100
+2.000
100,1000,3000
+2.50
110,120,130,140,150
+2.500
100,1000,3000
+2.50
180,200,250,270,300,500
+3.000
100,1000,3000
+2.00
Remarks:
Filled PTFE Teflon rods are available in other sizes and thickness according to customer's specific
requirements.
Competitive Advantage:
1.Excellent Chemical property 2.Virgin and recycled materials available 3.Any sizes available
4.Fast Usually
Hot Tags: Chemical Resistant Teflon Rod, Natural Filled PTFE Rod, Durable Teflon Rod Supplier
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy
