Products

Quick Overview: Filled PTFE Teflon rod is manufactured by technics of molding method in the diameter from 5mmto 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of filled teflon PTFE rod has similar friction levels to ice. Extrusion teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Filled PTFE Teflon rod has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber, metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.

Quick Overview: Skived PTFE Teflon tape commonly known as teflon film or PTFE film - is manufactured by technics of compacting, sintering, rotary cutting with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of skived teflon PTFE film has similar friction levels to ice. Skived teflon PTFE film can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Skived PTFE Teflon tape can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on.

Quick Overview: Expanded PTFE Teflon sealing tape(Teflon Sealant Joint Tape) is made with un-sintered PTFE/Teflon. PTFE is resistant to all chemical products and solvents with the exception of alkaline materials. It has good resistance to elevated pressures and has a high thermal stability. Expanded PTFE sealing tape is odourless and tasteless making it suitable for food applications and is WRC approved for use with potable water. Expanded PTFE Teflon sealing tape is a kind of dynamic sea. It has extremely low coefficient of friction, non abrasion, excellent seal ability, does not hydrolyze and so on

Quick Overview: PTFE Teflon slide bearing commonly known as teflon bearing or PTFE bearing - is manufactured by technics of molding, sintering and finalizing the design to various sizes with PTFE suspension resin. It can be adhered to rubber and metal with one side etched. And different fillings can be used to achieve special demands. PTFE slide bearing can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. PTFE bearing slide is made from high strength PTFE suspension resin by methods of moulding, sintering and finalizing the design to various sizes. Different fillings can be used to achieve special demands. It can also be adhered to rubber and metal with one side etched.

Quick Overview: Tefon resin is first molded into work-blank and then skived. Teflon sheets are known as flexible or thin sheets.It recognized as the first fluorocarbon material in the world and referred to as PTFE or Teflon, it is the most chemically resistant plastic known. It has a working temperature range of minus -180°c to 260°c It also has a very low coefficient of friction excellent thermal and electrical insulation properties and is commonly used in food contact applications. It provides good thermal stability and has good electrical properties, but is not suitable for wear application and is difficult to bond.

Quick Overview: Expanded PTFE Teflon sheet is made of 100% expanded PTFE by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi directions.PTFE Expanded Sheets gasketing possesses universal resistance against common chemicals, except melted alkali metal, fluorine at liquid and gas states. It is free from asbestos and other lung-intruding materials. It meets the FDA requirements, doesn't have any corrosion and is able to be stored without any time limits. Some of its features are that it has Good Flexibility, Good Seal ability, highly compressible, Non Contaminating, and Non Toxic etc.