PTFE factory in China for sale

Quick Overview: Filled teflon PTFE tube is manufactured by technics of molding method in the diameter from 0.5mm to 1800mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of filled teflon PTFE tube has similar friction levels to ice. Filled teflon PTFE tube can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Filled teflon PTFE tube has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber,metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient

Quick Overview: PTFE Teflon hose assembly is mainly composed of inner Teflon hose (ideal anti-corrosion material) and stainless steel braid outside for protection and loaning pressure, with buckled metal connectors on both ends. Teflon PTFE hose has the advantages of chemical corrosion resistant, anti-aging, anti-high and low temperature and electrically insulated. Teflon PTFE hose is usually applied to transmit highly corrosive fluid, gas and various chemicals, fuel and lubricant or in oil, gas and hydraulic pressure system. It is widely used in many fields, such as aviation, steel, automobile, electronic industry and mechanical industry, etc.

Quick Overview: Extruded PTFE Teflon tube is manufactured by technics of extruding method in the diameter from 0.5 to 250mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE tube has similar friction levels to ice. Extruded teflon PTFE tube can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Teflon Tube has the best electrical properties of all plastic.

Quick Overview: Filled PTFE Teflon rod is manufactured by technics of molding method in the diameter from 5mmto 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of filled teflon PTFE rod has similar friction levels to ice. Extrusion teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Filled PTFE Teflon rod has strong corrosion resistance and friction-resistance,By adding filler such as glass fiber,carbon fiber,copper powder,graphite,asbestos,MOS2,AL2O3,carbon powder,ceramic fiber, metal powder,polyamide,PS,the hardness,compression strength and abrasion resistance of the products is improved ,in addition,it will have good heat conductivity and low heat expansion coefficient.

Quick Overview: Molded PTFE Teflon rod is manufactured by technics of extruding and molding method in the diameter from 10 to 500mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of molded teflon PTFE rod has similar friction levels to ice. Molded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Molded Teflon rod and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.

Quick Overview: Extruded PTFE Teflon rod is manufactured by technics of paste extruding and ram extruding method in the diameter from 5 to 300mm with PTFE granular resin. As PTFE has a very low co-efficient of friction, so the surface of extruded teflon PTFE rod has similar friction levels to ice. Extruded teflon PTFE rod can work at -180°C ～+260°C and is the best electrical insulator of all known plastics. Extruded PTFE Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications.